PolyTenax Knife Grade Polyester resin is excellent for laminating marbles, granites, agglomerates, or engineered stone and can be used for fills or seams on any natural stone. It is fast working - under ideal conditions the gel time is 2-3 minutes with a full cure of 50-60 minutes.
This polyester glue was designed to do laminations on granite, which sets it apart from other polyester resins. This is Tenax's fastest setting and strongest polyester resin available today and it will give you the strongest bond.
PolyTenax Knife Grade Polyester Resin is transparent and can also be colored to match your stone! Mixed properly (3% hardener at 75 degrees fahrenheit) this glue has a gel time of 2-3 minutes. It will be tacky after 10-15 minutes and fully cured in 50 - 60 minutes! This can be used even at low temperatures (down to 32 degrees Fahrenheit), but the colder it gets the slower the chemical reaction so it will slow down to the normal curing range of poly resins...you gotta love that!
Available in 1 liter, 4 liters or 17 liter containers. Here are the links:
1 liter
http://www.defusco.com/Glues:-Epoxy,-Polyester,-etc.-Polyester-Resins/c82_501/p2672/PolyTenax-Knife-Grade-Polyester-Resin---1-Liter/product_info.html4 liters
http://www.defusco.com/Glues:-Epoxy,-Polyester,-etc.-Polyester-Resins/c82_501/p2700/PolyTenax-Knife-Grade-Polyester-Resin---4-Liters/product_info.html17 liters
http://www.defusco.com/p2708/PolyTenax-Knife-Grade-Polyester-Resin---17-Liters/product_info.html
