Fabricating Stone for the Do-It_Yourselfer is here

[Mark D.]

This is the set of 3 DVD's that shows you how to fabricate a contour onto the edge of your granite counter top, how to cut the sink hole and install the undermount sink, from start to finish! Plus new material added for straight cuts, glues, sealers and repairs.

This set has almost 4 hours of solid material in it covering all aspects of making a granite countertop!

When you buy all three of these together, you save 10%, plus pay the same shipping as you would if you bought just one video.



Only available at www.defusco.com

[johncrockett]

I'm building a new house and was leaning towards granite tile.  I don't understand what this dvd is all about.  I thought a slab of granite was custom made.  Are you showing how to buy a raw piece of granite and turn it into a custom made countertop?  I was wondering approximately how much it would cost for the diyer for making their own granite slab as your dvd explains.  I would like to buy the dvd but don't understand what it is exactely instructing.
Thanks
John

[Mark D.]

John,
this set of DVD's shows you how to take a raw piece of granite slab and turn it into a custom made countertop. How to fabricate the edge on to it, how to put an undermount sink into it and how to install it. You have to supply the granite, we have the tools and the instruction.

As far as how much, it depends. The shape will determine the cost of the router bit. You will need a variable speed grinder and a Skilsaw (which we can get you at a good price if you do not have them), You will need a grinding cup, polishing pads and other items.

The total cost for the tools will range from $400 to about $1200. Add in a slab of granite and you can save a lot of money making your kitchen luxurious.

Glad to be of service,
Mark

[reality]

What about a forklift or handling equipment, is that covered. How do I get the slab to my house? I won't need any other training? Do I have to have any special skills? What happens if I make a mistake? Can you fix mistakes? Can I do it myself, or will I need some help from two or three other people? Can you usually get it right the first time?

[Mark D.]

I have listed the answers behind your questions:

What about a forklift or handling equipment, is that covered.
No, that is not covered in the DVD.

How do I get the slab to my house?
You will need to either have it delivered or get pieces that are cut down to fit in the back of a pickup truck. Not only would you need an 'A' frame for moving full slabs, but since they weigh 500 pounds each getting them on & off the truck will prove unwieldy. They are also harder to work for the novice, and a full slab is usually unnecessary as a counter is only about 25" deep.

I won't need any other training?
To work the pieces? This DVD set will teach you what you need to know to make finished and installed granite counters.

Do I have to have any special skills?
It is helpful, but not required. If you have ever worked with wood the processes are very similar.

What happens if I make a mistake? Can you fix mistakes?
Most mistakes can be fixed, but if you cut away too much material it is difficult (but not impossible) to put it back.

Can I do it myself, or will I need some help from two or three other people?
You will need help moving the pieces of granite, but the actual work may be done by one individual by himself or herself, as the DVD's show.

Can you usually get it right the first time?
You can make an awesome piece the first time, yes. Will it be perfect? No, probably not, but it will be a keeper if you take your time and use the right tools. Your second piece will be even better as their is no substitute for experience.

We have sold thousands of these DVD's and have lots of raves about them. The only complaint was that the first DVD has some shaking by the cameraman. They are complete and teach fabrication correctly. I am sure that if you purchase them and use the info to make a granite piece you will be very happy you found us!

If you have any other questions please contact us at 800-289-6834.

Glad to be of service,
Mark

[reality]

What kind of slabs are you talking about. Every one I've seen is delivered on a straight truck and has to be unloaded with a crane or forklift. Who would I get to cut the slab? A professional? Sounds like it might be cheaper just to hire a professional. And less risky. What do I do with the waste? Will I need a dumpster? What about environmental issues with silica or sludge? Are all these issues covered on the DVD?

[Mark D.]

No. It is about MAKING COUNTERTOPS out of granite slabs.

It does discuss making cuts.
It is much cheaper to do it yourself rather than hiring a professional (unless you are a complete klutz)..

What is life without risk?

What do I do with the waste? It's stone. you can throw it away, put it in your garden, whatever you want to to with the scrap.

Will I need a dumpster? No.
 
What about environmental issues with silica or sludge?  wear a dustmask and an apron.

Are all these issues covered on the DVD? Some.

It doesn't cover all the stuff you asked about, but it also doesn't cover the history of granite. It's about fabricating a piece of stone into a countertop. Or can't you read?

Mark

[dshoe]

Hi Mark,

I am considering using granite tile on my countertop.  Is the video series helpful for this type of production? 

thanks

[Mark D.]

They are made for teaching the do it yourselfer to make granite countertops! They will give you the confidence to make a masterpiece!

It ain't rocket science...here's the link:
http://www.defusco.com/How-To-DVDs-&-Tool-Packages/c654/p2478/Buy-Fabricating-Stone-DVDs-1,2-&-3.--Save-10/product_info.html

Glad to be of service,
Mark

[trihai]

I am a bit confused.  On Ebay, you're selling the 3 DVDs set for $29.99, but in your store, you're selling it for a lot higher.  Are they the same set of DVDs or different.
Thank you.

[Mark D.]

They are the same DVD set. The ones on Ebay starting at $29.95 are an auction. That is the starting price. We use the auctions to drive traffic to the webstore.
They are also on Ebay in our store for the same price as the website price.

Mark

[Revolution_granite]

Hi Mark

I see that topic bring you a lot of headache!!

I appreciate you patience!



Regards

Fabiano Silva
Revolution Granite

[Mark D.]

Thanks Fabiano...you brought a smile to my face after rereading these posts...

Mark